1,300 L Cyclic Corrosion Test Chamber
Product codePW-CRH-1300

1,300 L OEM corrosion chamber. A single 7-inch touchscreen PLC/HMI controls salt fog, oscillating solution spray, immersion, drying and freezing.
For corrosion testing of coated panels, galvanized parts and metal hardware.
Continuous neutral salt spray methods
- ISO 9227 (NSS)
- ASTM B117
OEM cyclic corrosion test methods
- ISO 16701:2025
- Ford CETP 00.00-L-467
- Volvo VCS 1027,149 (ACT-1)
- Volvo VCS 1027,1449 (ACT-2)
- Volvo STD 423-0014
- Volvo STD 1027,1375 (VICT)
- TP.JLR 52.265
- GMW14872
- CCT1
- CCT2
- DIN 55635
- Scania STD 4319
- VDA 233-102
- DIN EN ISO 11997-3
- IEC 60068-2-52 (7/8)
- ASTM G85 A5
- ASTM G44
- GM9540P
- SAE J2334 (A/B/C)
- Renault ECC-1 / D17 2028
- Hyundai MS600-66 (CCT-A/B/C/D)
- Honda 5100Z-SG0-A000
- JASO M609
The chamber is built to run the listed cycles. Recipes are configured for the method variants and specification revisions in the order.
Download the Turkish or English brochure for the full list of vehicle manufacturer methods.
OEM configuration hardware and controls
- Active cooling down to −20 °C. Separate water fog for 95–100% RH. 23 °C / 50% RH operating point and dew point control.
- Atomised salt fog with a high fallout setting of 2–5.5 mL/80 cm²/h. Overhead oscillating solution spray for direct wetting.
- Temperature-controlled automatic immersion, chamber wall rinse and a 35 °C to 70 °C temperature transition in 15–30 minutes.
- External air conditioning unit with an electrical connector and air hose. Single 7-inch touchscreen PLC/HMI and time-stamped test logs.